• Finish Kare Edge Wax 68

Manufacturer's Description

  Formulated specifically for FRP and cultured marble industries where a flange- or edge-wax is required to assist in the prompt and easy release of the part.

  • Edge Wax is a semi-paste and it incorporates synthetic waxes into a system that forms a film that is virtually unbendable when applied as follows.


Apply 3 consecutive coats of #68 Edge Wax. Allow each coat to dry before applying the next one. Apply 2nd and 3rd coats to all flanges, corners, edges and areas where a gloss is not required. This builds up a wax surface that will produce multiple releases and should only require periodic application unless the area is marred when pulling the part. Reapply the Edge Wax to affected areas and a thin coat all over to get an even film.

Volume US Gallon

Finish Kare Edge Wax 68

  • Brand: Finish Kare
  • Product Code: EDGE-WAX-01
  • Availability: In Stock

Your selection

  • £72.00

  • Ex Vat: £60.00

Tak Cloths

Tak Cloths

Tack cloths are a slightly tacky adhesive material ideal for removing dust from moulds or patterns p..

£5.40 Ex Vat: £4.50



Cotton stockinette material of medium thickness - 800gm. Sold by the roll but can be cut to requi..

£4.80 Ex Vat: £4.00

Cotton Cloth Rags

Cotton Cloth Rags

Cut cotton rags suitable for general cleaning, polishing moulds and finished products   ..

£15.00 Ex Vat: £12.50

Easy ordering process